plasty - teplotní vlastnosti
16.08. 2013by Admin E-konstruktérTeplotní vlastnosti vybraných plastů - teplotní deformace, max. teplota okolí po krátkou dobu, max. teplota okolí trvalá, teplotní vodivost, koef. lineární teplotní roztažnosti, Hodnocení hořlavosti polymerů
- není údaj
vyhledávání je možné pouze v 1. sloupci
| název | teplotní deformace při tlaku 4,5 bar [°C] | teplotní deformace při tlaku 18 bar [°C] | max. teplota okolí po krátkou dobu [°C] | max. teplota okolí trvalá [°C] | teplotní vodivost [W/(m.K)] | koef. lineární teplotní roztažnosti [mm/mm/°C] | Hodnocení hořlavosti polymerů |
|---|---|---|---|---|---|---|---|
| ABS | 101.11 | 95 | 98.888 | 71.111 | 0.17 | 9.36E-5 | HB |
| ABS Conductive | 107.22 | 101.666 | - | 93.333 | - | 5.94E-5 | HB |
| ABS FR | 87.77 | 72.222 | - | 71.111 | 0.172 | 0.000117 | 5V-A @ ,108 |
| ABS SD | 87.77 | 71.111 | - | - | - | 0 | HB |
| Acetal Copolymer | 157.77 | 110 | 140.555 | 90.555 | 0.23 | 8.46E-5 | HB |
| Acetal Copolymer SD | 130.55 | 87.777 | - | - | 0.302 | 0.000117 | HB |
| Acrylic Cast | - | 87.777 | - | 65.555 | 0.208 | 7.2E-5 | |
| Acrylic Extruded | 96.11 | 87.777 | - | 82.222 | 0.129 | 6.3E-5 | HB |
| Ardel® Polyarylate | 180 | 173.888 | - | - | 0.213 | 0.0001098 | V-0 |
| Celazole® PBI | - | 426.666 | - | 315.555 | 0.403 | 2.34E-5 | V-0 |
| Ceramic Macor® | - | - | - | -16.96 | 1.464 | 1.026E-5 | |
| CPVC | - | 92.222 | - | 93.333 | 0.136 | 6.948E-5 | V-0 |
| Delrin® 100AF | - | 117.777 | - | 82.222 | - | 9.0E-5 | HB |
| Delrin® 150 | 168.88 | 125 | 148.888 | 85 | 0.374 | 0.0001224 | HB |
| Delrin® 570 | 165 | 130 | - | 85 | - | 5.85E-5 | HB |
| ECTFE Halar® | 90 | 62.777 | - | 148.888 | 0.149 | 0.0001008 | V-0 |
| ETFE | 81.11 | 51.111 | 198.888 | 155 | 0.237 | 0.0001296 | V-0 |
| FEP | 73.88 | 54.444 | 232.222 | 204.444 | 0.201 | 0.0001422 | V-0 |
| HDPE | 82.22 | - | 87.777 | 82.222 | 0.475 | 0.0001206 | HB |
| HPV 13 | - | 101.666 | - | 85 | 0.237 | 9.18E-5 | HB |
| Hydel® PEI-7 | - | 198.888 | - | 171.111 | - | 5.22E-5 | V-0 |
| Hydex® 202 | 143.33 | 137.777 | - | - | - | 6.66E-5 | |
| Hydex® 301 | 104.44 | 76.666 | - | - | - | 6.12E-5 | |
| Hydlar® Z | - | 243.333 | - | 148.888 | - | 2.88E-5 | |
| Imidex® | - | - | - | 230 | 0.18 | 5.58E-5 | VTM-0 @ 1 mil |
| Laminate G-10/FR-4 Glass Epoxy | - | - | - | 140 | - | 1.08E-5 | V-0 |
| Laminate G-11 Glass Epoxy | - | - | - | 190 | - | 1.296E-5 | HB |
| Laminate G-7 Glass Silicone | - | - | - | 220 | - | 9.9E-6 | V-0 |
| Laminate G-9 Glass Melamine | - | - | - | 140 | - | 1.494E-5 | V-0 |
| LDPE | 43.33 | 36.666 | 71.111 | 71.111 | - | 0.0001152 | Not Rated |
| Meldin® 7001 | - | - | 482.222 | 315.555 | 0.345 | 4.86E-5 | |
| Meldin® 7003 | - | - | 482.222 | 315.555 | - | - | |
| Meldin® 7021 | - | - | 482.222 | 315.555 | 0.72 | 3.96E-5 | |
| Meldin® 7022 | - | - | 482.222 | 315.555 | - | 2.52E-5 | |
| Meldin® 7211 | - | - | 482.222 | 315.555 | 0.749 | 4.32E-5 | |
| Noryl® 30% GF | 137.77 | 132.222 | - | - | 0.243 | 2.52E-5 | V-0 @ ,236 |
| Noryl® PPO | 137.22 | 123.333 | 110 | 104.444 | 0.19 | 5.94E-5 | V-0 @ ,236 |
| Nylon 12 Low Moisture | 172.77 | 50 | 148.888 | 121.111 | - | 9.9E-5 | |
| Nylon 6 Copolymer | 204.44 | 93.333 | 148.888 | 98.888 | - | 9.0E-5 | |
| Nylon 6 FG Oil Filled | 204.44 | 93.333 | 165.555 | 110 | - | 9.0E-5 | |
| Nylon 6 Heat Stabilized Blue | 204.44 | 93.333 | 165.555 | 121.111 | - | 9.0E-5 | |
| Nylon 6 Impact Modified | 204.44 | 93.333 | 165.555 | 110 | - | 8.1E-5 | |
| Nylon 6 MD Filled | 204.44 | 93.333 | 165.555 | 110 | - | 9.0E-5 | |
| Nylon 6 Natural | 204.44 | 93.333 | 165.555 | 110 | - | 0.0001098 | |
| Nylon 6 Oil Filled | 204.44 | 93.333 | 165.555 | 110 | - | 9.0E-5 | |
| Nylon 6 Oil/MD Filled | 204.44 | 93.333 | 165.555 | 110 | - | 9.0E-5 | |
| Nylon 6 Solid Lubricant Filled | 210 | 79.444 | 165.555 | 110 | - | 9.0E-5 | |
| Nylon 6/12 Low Moisture | - | 61.111 | - | - | 0.22 | 9.0E-5 | HB |
| Nylon 6/6 30% GF | - | - | - | - | 0.243 | 2.16E-5 | HB |
| Nylon 6/6 Extruded | 235 | 90 | 148.888 | 85 | 0.245 | 8.1E-5 | V-2 |
| Nylon 6/6 Heat Stabilized | 200 | 90 | - | - | - | - | HB |
| Nylon 6/6 MDS Filled | 243.33 | 90 | 179.444 | 110 | 0.245 | 7.2E-5 | HB |
| Nylon 6/6 Super Tough | 132.22 | 63.888 | - | - | - | 0.0001206 | HB |
| PBT-Hydex® 4101 | 154.44 | 93.333 | - | 105 | 0.21 | 8.352E-5 | HB |
| PBT-Hydex® 4101L | - | 90.555 | - | 105 | - | - | |
| PCTFE | - | - | - | 120 | - | - | V-0 |
| PEEK | - | 160 | - | 260 | 0.245 | 4.68E-5 | V-0 |
| PEEK 30% CR | - | 315.555 | - | 260 | 0.918 | 1.44E-5 | V-0 |
| PEEK 30% GR | - | 315.555 | - | 260 | 0.432 | 2.16E-5 | V-0 |
| PEEK Bearing Grade | - | 276.666 | - | 260 | - | 5.58E-6 | |
| PET-1400® | - | 79.444 | 100 | 110 | 0.288 | 7.02E-5 | HB |
| PET-Tecapet® | 115.55 | 79.444 | 160 | 110 | 0.289 | 7.02E-5 | HB |
| PETG | 73.33 | 69.444 | - | 73.333 | 0.19 | 6.84E-5 | HB |
| PFA | 75 | 90 | 287.777 | 260 | 0.187 | 0.000153 | V-0 |
| Phenolic C Canvas | - | - | - | 125 | - | 2.16E-5 | HB |
| Phenolic CE Canvas | - | - | - | 125 | - | 2.07E-5 | HB |
| Phenolic L Linen | - | - | - | 125 | - | 1.8E-5 | HB |
| Phenolic LE Linen | - | - | - | 125 | - | 1.8E-5 | HB |
| Phenolic N-1 Nylon | - | - | - | 105 | - | 9.54E-5 | HB |
| Phenolic X Paper | - | - | - | 130 | - | 1.296E-5 | HB |
| Phenolic XX Paper | - | - | - | 130 | - | - | HB |
| Phenolic XXX Paper | - | - | - | 130 | - | 1.494E-5 | HB |
| Polycarbonate | 137.77 | 132.222 | 135 | 115.555 | 0.194 | 6.75E-5 | V-0 @ ,220 |
| Polycarbonate 20% GF | 147.77 | 146.111 | 132.222 | 130 | 0.211 | 2.7E-5 | V-1 |
| Polycarbonate 40% GF | 154.44 | 146.111 | - | 130 | 0.22 | 0.000162 | V-1 @ ,044 |
| Polypropylene Copolymer | 78.33 | - | 98.888 | 82.222 | - | 7.74E-5 | Not Rated |
| Polypropylene Homopolymer | 98.88 | 54.444 | 93.333 | 82.222 | 0.116 | 7.74E-5 | HB |
| Polystyrene High Impact | 87.22 | 73.888 | - | 73.888 | 0.141 | 9.0E-5 | HB |
| Polysulfone | 181.11 | 173.888 | 171.111 | 140.555 | 0.259 | 5.58E-5 | V-0 |
| PPS | 204.44 | 104.444 | - | 170 | 0.299 | 7.2E-5 | V-0 |
| PTFE | 140 | 55 | 315.555 | 260 | 0.245 | 0.000117 | V-0 |
| PTFE 25% CF | - | - | - | 260 | 0.72 | 0.000144 | |
| PTFE 25% GF | - | - | - | 260 | 0.432 | 9.9E-5 | |
| PVC | 81.66 | 65.555 | 71.111 | 60 | 0.147 | 5.76E-5 | V-0 |
| PVDF | 148.88 | 112.777 | 171.111 | 137.777 | 0.19 | 0.0001278 | V-0 |
| PVDF Kynar 740 | 125 | 105 | - | - | 0.17 | 0.0001188 | V-0 |
| Radel® A PES | 213.88 | 204.444 | - | 204.444 | 0.162 | 4.86E-5 | V-0 |
| Radel® R PPSU | 213.88 | 207.222 | - | - | 0.348 | 5.58E-5 | V-0 |
| Radel® R5500 | 213.88 | 207.222 | - | - | 0.348 | 5.58E-5 | V-0 |
| Rulon® AR | - | - | - | 260 | 0.331 | 9.18E-5 | |
| Rulon® J | - | - | - | 287.777 | 0.245 | 0.0001044 | |
| Rulon® LR | - | - | - | 287.777 | 0.331 | 8.82E-5 | |
| Ryton® PPS 40% GF | - | - | - | 171.111 | - | - | |
| Ryton® PPS Bearing Grade | - | - | - | 171.111 | - | - | |
| Semitron® ESd 225 | - | 107.222 | - | 82.222 | - | 0.0001674 | HB |
| Semitron® ESd 410C | - | 210 | - | 170 | 0.353 | 3.24E-5 | V-0 |
| Semitron® ESd 420 | - | 215.555 | - | 171.111 | 0.23 | 5.76E-5 | V-0 |
| Semitron® ESd 500HR | - | 98.888 | - | 260 | - | 0.0001026 | V-0 |
| Semitron® ESd 520HR | - | 271.111 | - | 260 | 0.357 | 4.23E-5 | V-0 |
| Tecaform® UD Blue | - | - | - | 100 | - | - | |
| Tecapro MT | - | 86.111 | - | - | - | - | |
| Tecator® TI5013 | - | 277.777 | - | 260 | - | 2.988E-5 | V-0 |
| Tecator® TI5031 | - | 278.888 | - | 260 | - | - | V-0 |
| Tecator® XP142T | - | - | - | 260 | - | 3.798E-5 | V-0 |
| TPX® Polymethylpentene | - | 170 | - | 200 | 0.41 | 0.0001296 | HB |
| UHMW-PE | 82.22 | - | 93.333 | 82.222 | 0.417 | 0.000198 | Not Rated |
| UHMW-PE Anti-Static | - | - | 93.333 | 82.222 | - | 0.000198 | Not Rated |
| UHMW-PE Oil Filled | - | - | 93.333 | 82.222 | - | 0.000198 | Not Rated |
| UHMW-Tivar HOT | -17.77 | 46.666 | -17.777 | 135 | 0.409 | - | HB |
| Ultem® | 210 | 200 | 193.333 | 170 | 0.122 | 5.58E-5 | V-0 |
| Ultem® 2300 | 212.22 | 210 | - | 180 | 0.224 | 1.98E-5 | V-0 |